MTE - EXTERNAL GRINDING MACHINES
Grinding machine for external diameter of inner and outer ring of bearings
The grinding machine MTE is projected to develop operations of external grinding diameters to various types of bearings.
Type of processing

Feature
GRINDING SLIDES:
The movement is controlled through a brushless motor.
WORK HEAD SLIDE:
The regulation of the position of the ring is controlled through a brushless motor with 0÷3000 rpm.
The work head can be tilted by a minimum of -5° to a maximum of +45°.
The work head can be tilted by a minimum of -5° to a maximum of +45°.
DRESSING:
The cross slide is fixed on the top of the grinding slide and it is possible to equip the machine with a CNC dressing system, with a diamond roller disk.
The movement is controlled through a brushl-ess motor.
The movement is controlled through a brushl-ess motor.
GRINDING SPINDLES:
A wide range of electrospindle are available.
When the grinding wheel touches the piece, there is an ‘acoustic emission system’ which detect it and a ‘balancing system’ to balance the grinding wheel to better perform the grinding
When the grinding wheel touches the piece, there is an ‘acoustic emission system’ which detect it and a ‘balancing system’ to balance the grinding wheel to better perform the grinding
LOADING:
The loading of the rings is performed by automatic loading-unloading chuck or by an anthropomorphic robot arm.
RING SYSTEM:
The ring is kept in the machining position on the work head by a couple of shoe and it is possible to block it axially with a magnetic coil or a pressure clamp.

